Setting GPRS All Operator GSM Indonesia
3 (Three)
Way of Activation :Active automatic at the time of registration and will be sent setting OTA as according to type of your handset.
Following setting manual:
GPRS/WAP
APN : 3gprs
username : 3gprs
password : 3gprs
IP address: 10.4.0.10
WAP homepage : http://wap.three.co.id/
HTTP port setting : 3128
MMS
APN : 3mms
username : 3mms
password : 3mms
mms gateway IP address: 10.4.0.10
MMS server address : http://mms.three.co.id/
HTTP port setting : 3128
So you connection to PC, Input of Extra Settings AT+CGDCONT=1,"IP","3gprs"
Telkomsel
Way Of Activation GPRS/MMS :
Halo Card
Enlist in GRAPARI or type sms "GPRS" sent to 6616 and "MMS" to 6616
SIMPATI
Type sms " GPRS " send to 6616 and "MMS" number code of behind simcard SIMPATI and send to 6616
Following setting manual :
GPRS/WAP
1. APN : telkomsel (wap), internet (general)
2. Username : wap
3. Password : wap123
4. WAP Gateway IP Address - 10.1.89.130
5. Port : 9201 (standard), 8000 (proxy)
6. Homepage : http://wap.telkomsel.com/
MMS
1. APN : mms
2. Username : wap
3. Password : wap123
4. WAP Gateway IP Address - 10.1.89.150
5. Port : 9201 (standard), 8000 (proxy)
6. Homepage - http: mms.telkomsel.com
So you connection to PC, Input of Extra Settings AT+CGDCONT=1,"IP","telkomsel"
INDOSAT
IM3
Way of Activation :Active automatic at the time of registration and will be sent setting OTA as according to type of your handset.
Following setting manual :
APN : http://www.indosat-m3.net/
Username : gprs
Password : im3
Gateway IP : 010.019.019.019
Port : 9201 or 8080
Homepage : http://wap.m3-access.com/
As for parameter of MMS shall be as follows :
Data bearer : GPRS
Access Point Name (APN) : mms.indosat-m3.net
Username : mms
Password : im3
Gateway IP : 010.019.019.020
Port : 8081
Homepage : http://mmsc.m3-access.com/
So you connection to PC, Input of Extra Settings AT+CGDCONT=1,"IP"," www.indosat-m3.net "
Mentari
GPRS
Profile Name : INDOSATGPRS
Homepage URL : http://indosat.com/
IP Address : 10.19.19.19
Bearer : GPRS
User Name : indosat
Password : indosat
APN : indosatgprs
MMS
Profile Name : INDOSATMMS
Connection URL : http://mmsc.indosat.com/
IP Address : 10.19.19.19:8080
Bearer : GPRS
User Name : indosat
Password : indosat
APN : indosatmms
So you connection to PC, Input of Extra Settings AT+CGDCONT=1,"IP"," indosatgprs"
Matrix
Profile Name : SATWAP
Access Point : http://www.satelindogprs.com/
Username :
Password :
IP Address : 202.152.162.250
Homepage : http://wap.matrix-centro.com/
Authentication : Normal
Connection Security : Off
So you connection to PC, Input of Extra Settings : AT+CGDCONT=1,"IP",www.satelindogprs.com
XL
Profile Name : XL GPRS
Access Point : http://www.xlgprs.net/
Username : xlgprs
Password : proxl
IP Address : 202.152.240.50
Homepage : http://wap.lifehand.com/
Authentication : Normal
Connection Security : Off
So you connection to PC, Input of Extra Settings AT+CGDCONT=1,"IP"," www.xlgprs.net"
Thanks for trescenter.blogspot.com for the article.
Read more...
CANON MPC 190
Reset Waste Ink
1) Enter SERVICE MODE.By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key.
CANON MP 145
With the printer powered off but connected to a power source , you must:
A.Press stop/reset button, and then press [ON/OFF] button to restart
B.Press [ON/OFF] again and then press twice the stop/reset button.
C.Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green.
D.Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.
E.Turn off the printer.( it must be turn off) and then turn it on again.
Use with your own risk , i'll try this way and my Pixma MP145 not blink again.
Read more after jump
CANON MP 150
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to thefunction listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset button pressingLED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM
4 times Green Waste ink counter reset
5 Turn off the printer.( it must be turn off)and then turn it on again.
CANON PIXMA MP 160
1) With the printer off, but connected, press the On / Off button, while the Stop button / Reset. (The triangle inside the circle).
2) When the light of On / Off switch is (green), and press the release button Stop / Reset twicewhile held down the On / Off button (Power).
3) Release the buttons On / Off and Stop / Reset (regardless of order), Wait for the menu is ready
4) When the light of On / Off this green, press the Stop / Reset 4 times
5) Turn off the printer (press three times On / Off)
6) Enjoy it ...
Read more...