Resetter Canon MPC190/MP145/MP150/MP160

CANON MPC 190

Reset Waste Ink

1) Enter SERVICE MODE.By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key.

CANON MP 145
With the printer powered off but connected to a power source , you must:
A.Press stop/reset button, and then press [ON/OFF] button to restart
B.Press [ON/OFF] again and then press twice the stop/reset button.
C.Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green.
D.Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.
E.Turn off the printer.( it must be turn off) and then turn it on again.

Use with your own risk , i'll try this way and my Pixma MP145 not blink again.

Read more after jump

CANON MP 150
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to thefunction listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressingLED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM
4 times Green Waste ink counter reset
5 Turn off the printer.( it must be turn off)and then turn it on again.

CANON PIXMA MP 160
1) With the printer off, but connected, press the On / Off button, while the Stop button / Reset. (The triangle inside the circle).
2) When the light of On / Off switch is (green), and press the release button Stop / Reset twicewhile held down the On / Off button (Power).
3) Release the buttons On / Off and Stop / Reset (regardless of order), Wait for the menu is ready
4) When the light of On / Off this green, press the Stop / Reset 4 times
5) Turn off the printer (press three times On / Off)
6) Enjoy it ...